Power - Bush HA42U5232MEKB Instruction Manual

Advanced features
Getting the most from your TV
3. Automatically turns the connected AV receiver off when you turn the TV off .
4. Adjust the volume and mute functions via the [VOL+/–] and [MUTE] buttons on your television remote control.
Video Camera
1. Automatically turns the TV on and switches the input to the connected video camera when the camera is turned
on.
2. Automatically turns the connected video camera off when you turn the TV off .
3. Controls menu operation [ARROW] buttons, playback, e.g. [PLAY] button of the connected video camera through
the TV's remote control.
Note: Not all devices with HDMI input/output are HDMI CEC compatible. For information about CEC
compatibility, refer to the instruction manual of the device. Refer to "HDMI connection (ARC supported)" on page
26 section of this manual for information relating to connecting an HDMI (ARC) enabled device.

Power

To enter this menu option, select the
control when in television mode, then go to Settings > Device Preferences > Power.
In this menu you can change the settings related to power consumption and the following modes are available:
If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line. (Calls are charged at the standard rate of your network provider).
icon while on the Home Page or press the [MENU] button on the remote
Sleep Timer – Lets you set the sleep timer so the television automatically switches off
after a set amount of time.
Off / 10 / 20 / 30 / 40 / 50 / 60 / 90 / 120 minutes can be selected.
Picture off – Allows you to turn off the display so that there is no picture, sound still
comes from the speakers. To turn display back on, press the [STANDBY] button on
the remote control.
Switch Off Timer – Controls the amount of time the set will continue to operate
without any buttons being pressed on the set or remote control before going into
standby.
Off / 30 / 60 / 90 / 120 / 150 / 180 / 210 / 240 minutes. Default is off .
No Signal Auto Power Off – Controls the amount of time the set will continue to
operate without a signal being received.
Off / 5 / 10 / 15 / 30 / 60 minutes can be selected. 15 minutes is default.
Advanced features 63