Tv - Control Buttons (Right Side); Aerial Connection; Power Connection - Bush LE-32GKA Instruction Manual

Getting Started
You'll be up and running in no time

TV - Control buttons (Right side)

1. ( )button
Switch the TV between On / Standby mode.
2. SOURCE button
Press to select among different input signal sources.
3. MENU button
Display the OSD (on screen display) menu.

Aerial connection

Connect the "aerial" or "cable TV" plug to AERIAL INPUT
(ANT.) socket located on the back of the TV .
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Getting Started
14
4. CH / button
Press to select a channel.
5. VOL +/- button
Press to adjust the volume.

Power connection

Please note: After unpacking, allow the TV to reach
ambient room temperature before connecting the TV to
the mains power socket.
Connect the power cord plug to the mains power socket.