Wall Mounting - Bush HA42U5232MEKB Instruction Manual

Getting to know your TV
You'll be up and running in no time

Wall Mounting

IMPORTANT: Before drilling any holes in the wall, ensure you are not drilling where there could be any electric
wires, water or gas pipes.
IMPORTANT : If wall mounting this TV, only use the screws already provided in the wall mounting holes. Using
other screws which are longer could cause irreparable damage to internal parts.
For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards so that the
TV's screen is 'face on' . See fi g 1 and 2 below.
fi g 1
INCORRECT
Viewing angle
For VESA wall mounting information please refer to the Technical Specifi cation page.
If you require any technical guidance or fi nd that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Getting to know your TV
18
1. Remove the four screws located at the back of the TV set.
2. The wall mount can now be easily attached to the
mounting holes, located on the back of the TV, using the
same four screws removed.
fi g 2
TV
CORRECT
or online at www.bush-support.co.uk.
TV
Viewing angle