Do you have a question about the DLED49FHD and is the answer not in the manual?
Questions and answers
Anabel Taylor
March 2, 2025
Tv not powering up
1 comments:
Mr. Anderson
March 2, 2025
The Bush DLED49FHD TV may not be powering up due to the following reasons: 1. The power cord is not securely plugged into a wall outlet. 2. The Power button on the TV has not been pressed.
Check these conditions and ensure the TV is properly connected and powered on.
Product support Power Connection Troubleshooting & Tips Switching On/Off Help and assistance Remote Control Disposal information Connections Your Bush Guarantee Connections First Time Installation Standard features TV Control Buttons & Operation Standby Notifications Using the Channel List Advanced features Media Playback via USB Input...
Safety information Important - Please read these instructions fully before installing or operating The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to CAUTION alert the user to the presence of uninsulated “dangerous voltage” within the product’s RISK OF ELECTRIC SHOCK DO NOT OPEN enclosure that may be of sufficient magnitude...
WARNING: Do not leave your TV in standby or installation of an extension lead, please consult a operating mode when you leave your house. competent electrician. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Safety information...
Safety information Important - Please read these instructions fully before installing or operating Moisture and Water Batteries Do not use this TV in a humid or damp place (avoid WARNING: Incorrect installation of batteries may bathrooms, the sink in the kitchen, and near the washing cause battery leakage and corrosion, resulting in damage machine).
Page 9
To be aware of such be applied. information is recommended to ensure that the functions can be used optimally. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Safety information...
Page 10
Safety information Important - Please read these instructions fully before installing or operating Markings on the Product Hereby, VESTEL Elektronik Sanayi ve Ticaret A.Ş., declares that the radio equipment type TFT IDTV is in compliance The following symbols are used on the product as with Directive 2014/53/EU.
Getting to know your TV You’ll be up and running in no time Ready? Let’s begin... License Notification Please read these instructions carefully. They contain The terms HDMI and HDMI High-Definition Multimedia important information which will help you get the best Interface, and the HDMI Logo are trademarks or registered from your TV and ensure safe and correct installation trademarks of HDMI Licensing Administrator, Inc.
Standby Search, Over Air Download or Timer is active. The LED can also blink when you switch on the TV from standby mode. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Getting to know your TV...
Getting to know your TV You’ll be up and running in no time Remote Control 1. Standby: Switches On / Off the TV 2. Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen. 3.
Page 16
Connections Bringing it all together Connections See the illustrations on the left side. Connector Type Cables Device You can use YPbPr to VGA cable to enable YPbPr signal via VGA input. You Scart cannot use VGA and YPbPr at the same Connection time.
After all the available stations are stored, Channels menu will be displayed. You can edit the channel list according to your or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Connections...
Standard features Simple everyday use TV Control Buttons & Operation “TV switched to stand-by mode automatically because there was no signal for a long time.” The Auto TV OFF option(in the Settings>System >More Up direction menu) could have been set to a value between 1 and 8 Down direction hours by default.
Advanced features Getting the most from your TV Media Playback via USB Input Start playback and All files in the list will be continuously activate played in original order You can connect 2.5” and 3.5” inch (HDD with external power supply) external hard disk drives or USB memory Start playback and The same file will be played stick to your TV by using the USB inputs of the TV.
Timer on Event option and press OK. You can set timers for future events. To cancel an already set timer, highlight that or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Advanced features...
Advanced features Getting the most from your TV event and press the OK button. Then select Delete Timer will be displayed, press OK button to complete software on Event option. The timer will be cancelled. upgrade process and restart TV. Notes: You cannot switch to any other channel while 3 AM search and upgrade mode there is an active timer on the current channel.
Page 25
You can use phase to get a clearer picture by trial and error. Reset Resets the picture settings to factory default settings (except Game mode). or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Advanced features...
Page 26
Advanced features Getting the most from your TV While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture menu while in PC mode. Sound Menu Contents Volume Adjusts the volume level.
Page 27
Change the IP and DNS configurations of your TV. Note: For detailed information on the options of this menu refer to the Wired Network Connection section. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Advanced features...
Page 28
Advanced features Getting the most from your TV Installation Menu Contents Automatic channel scan Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. (Retune) Manual channel scan This feature can be used for direct broadcast entry. Searches for the linked channels in the broadcast system. Digital Aerial: Searches for Network channel scan aerial network channels.
Page 29
TV to control the volume of the audio device. Displays Open Source Software license information. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Advanced features...
Page 30
Advanced features Getting the most from your TV of the TV. Highlight the desired one and press Left or Right Wired Network Connection button to change the setting from Automatic to Manual. You must have a modem/router connected to an active Now you can enter the Manual IP and / or Manual DNS broadband connection.
Page 32
(mm) Thread (Y) Commercial Brand BUSH Product No. 10120042 Model No. DLED49FHD Energy efficiency class Visible screen size (diagonal,approx.) (inch/cm) 49 inches / 124 cm On mode average power consumption (Watt) 48,0 W Annual energy consumption (kWh/annum) 70 kWh...
60 Hz 1280x960 60 Hz 1280x1024 60 Hz 1360x768 60 Hz 1400x1050 60 Hz 1600x1200 60 Hz 1920x1080 60 Hz or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Other information...
Other information Helpful technical information AV and HDMI Signal Compatibility Source Supported Signals Available PAL 50/60 NTSC 60 (SCART) RGB 50 RGB 60 PAL 50/60 Side AV NTSC 60 480I, 480P 60Hz 576I, 576P 50Hz PC/YPbPr 720P 50Hz,60Hz 1080I 50Hz,60Hz 1080P 50Hz,60Hz 480I...
32Kbps ~ 96Kbps (Bit rate) / 32kHz, 44.1kHz, 48kHz (Sampling rate) Baseline Resolution(WxH): 17000x10000 Picture .jpeg Progressive Resolution(WxH): 4000x4000 .bmp Resolution(WxH): 5760x4096 Subtitle .sub, .srt or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Other information...
Other information Helpful technical information Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x400 640x480 800x600...
Product support Help is always at hand Troubleshooting & Tips TV will not turn on Make sure the power cord is plugged in securely to a wall outlet. Press the Power button on the TV. Poor picture Check if you have correctly tuned the TV. Low signal level can cause picture distortion.
Lines open 8am-7pm Monday to Saturday and 10am-4pm Sunday. *Calls to Bush enquiry lines may attract a charge and set up fee from residential lines depending on your call plan/tariff. Mobile and other providers costs may vary, see www.bt.com/pricing for details.
Product support Help is always at hand Disposal information [European Union] These symbols indicate that the electrical and electronic equipment and the battery with this symbol should not be disposed of as general household waste at its end-of- life. Instead, the products should be handed over to the applicable collection points for the recycling of electrical and electronic equipment as well as batteries for proper treatment, recovery and recycling in accordance with...
Guarantor: Argos Limited - 489 - 499 Avebury Blvd. - Milton Keynes - MK9 2NW or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Product support...
Need help?
Do you have a question about the DLED49FHD and is the answer not in the manual?
Questions and answers
Tv not powering up
The Bush DLED49FHD TV may not be powering up due to the following reasons:
1. The power cord is not securely plugged into a wall outlet.
2. The Power button on the TV has not been pressed.
Check these conditions and ensure the TV is properly connected and powered on.
This answer is automatically generated