Troubleshooting Guide - Bush HA42U5232MEKB Instruction Manual

Product support
Help is always at hand

Troubleshooting Guide

If a full restart of the TV is required
If you have trouble, such as the picture not displaying on the screen or the remote control not working, reset the
television with the following procedure.
If an external USB device is connected to the TV, disconnect the USB device from the TV before resetting.
Power Reset
Restart the TV with the remote control.
Press and hold the power button on the remote control for about 5 seconds until the [Power off ] message is
displayed. Confi rm this by pressing OK button and the TV will turn off .
Unplug the AC power cord (mains lead).
If the problem persists after step 1, unplug the TV power cord (mains lead) from the electrical outlet and wait for 2
minutes. Then plug the power cord (mains lead) back into the electrical outlet.
Note: Your personal settings and data will not be lost after the TV restarts.
Factory Data Reset
If the problem persists after a power reset, try a factory data reset.
Note: Performing a factory reset will delete all of the TV's data and settings (such as Wi-Fi and wired network setting
information, Google account and other login information, Google Play and other installed apps).
Press the [HOME] button, then select Settings > Device Preferences > Reset > Erase everything.
After the factory reset process completes successfully, your television will proceed into the fi rst time installation mode.
You must agree to the Google Terms of Service and Google Privacy Policy.
What type of storage device do I require for Apps
Should you wish to store your Apps on an external memory device, this can either be in the form of a SD card or a
USB connected storage device (USB memory stick).
It is recommended that the memory device does not exceed 256Gb and has read speeds of at least 15MB per second
write speeds greater than 4MB per second.
Note: If using a powered memory device, ensure that the power is applied before turning on the set.
No colour/Dark picture/Colour is not correct/Picture is too bright
You can adjust colour tone, brightness and picture quality on your TV from the Picture menu in Settings.
Press the [HOME] button, then select Settings > Device Preferences > Picture.
In this menu you can make manual picture adjustments.
If you want to reset the picture settings, select Reset to Default option.
If you require any technical guidance or fi nd that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
90 Product support
or online at www.bush-support.co.uk.