Aerial & Cable Connection; Power Connection; Wall Mounting; Remote Control - Inserting Batteries - Bush ELED22134FHDDVDCNTD Installation & Operation Instructions

Getting Started
Aerial & Cable connection
ANT.

Power connection

IMPORTANT :The TV set is designed to
operate on 220-240V AC, 50 Hz.
Please note: After unpacking, allow the TV
to reach ambient room temperature before
connecting the TV to the mains power socket.

Wall Mounting

Remote control - Inserting batteries

AAA/R3
NOTE: When the remote control is not going
to be used for long periods of time, the batteries
should be removed. Otherwise the remote control
may be damaged, caused by battery leakage and
corrosion.

Switching the TV On and Off

Switching the TV On
To switch the TV on from standby mode:
a.
b.
For any help concerning set up and use of your TV please call the Customer Helpline: 0 345 604 0105
1
2
Standby
VGA
SPDIF
AAA/R3
Switching the TV Off
To turn off the TV completely, remove the
power cord plug from the mains power
socket.
NOTE: When the TV is in standby mode, the
standby LED can blink to indicate that features
such as Standby Search, Over Air Download
or Timer is active.
NOTE: If you switch on your TV via P +/-
buttons on the remote control or +/- on the TV
set, the programme that you were watching last
will be reselected.
Aerial or Cable
1
2