Hdmi Connection - Bush HA42U5232MEKB Instruction Manual

Connections
Bringing it all together
Before turning your set on, it is recommended that your external devices are connected before continuing with the
fi rst-time installation process. Depending on the source connectivity on your television, follow the guidance below
when connecting external devices.

HDMI Connection

For optimum picture quality, we recommend connecting your device to the television using an HDMI cable.
(A)
(A) External Device (not supplied).
(B) HDMI cable (not supplied)
Note: We recommend authorised Premium High-Speed HDMI Cable(s) bearing the HDMI logo.
HDMI CEC-Compatible Devices
If an HDMI CEC-compatible device (e.g., Blu-ray player, AV receiver) is connected with an HDMI cable, you can
operate the device with the televisions remote control. We recommend using the HDMI (ARC) connection when
used with an AV receiver – please refer to the ARC section of this Operation Manual (Page 26).
Adjusting HDMI CEC Settings
1. Turn on the connected device.
2. To enable HDMI control, press the [HOME] button, then select:
Settings > Device Preferences > Inputs.
3. Activate HDMI control on the connected device.
Available options:
HDMI control Allow the TV to control HDMI devices
If disabled, the connected device does not turn off automatically when the television is turned
Device auto
off .
power off
If disabled, the television does not turn on automatically when the connected device is turned
Television auto
on.
power on
CEC Device list Displays the HDMI CEC device list.
If you require any technical guidance or fi nd that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
26 Connections
HDMI
(B)
or online at www.bush-support.co.uk.
HDMI