Dtv (Digital Television) - Bush HA42U5232MEKB Instruction Manual

Advanced features
Getting the most from your TV

DTV (Digital Television)

DTV mode relates to Freeview (UK) and Saorview (in ROI). You can only tune into one type of service and this depends
upon the country which you are in. All models for the UK have Freeview Play built-in and this will be available once the
set has been tuned in and an internet connection is made.
While in the DTV mode, the following options will be available:
If you require any technical guidance or fi nd that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
52 Advanced features
Channel Scan - Allows you to retune the television for all digital and analogue channels.
Update Scan - Tunes all frequencies, on which channels are not currently tuned. This
is recommended when searching new channels which were added recently, without
retuning all channels.
Single RF Scan - Allows you to manually tune your digital signal by selecting the channel
number.
Manual Service Update - Channel positions, names and frequencies will be updated by
the provider.
LCN - Logical Channel Number. When turned on, digital stations will be ordered
according to provider preferences.
Channel Scan Type - Settings for Channel Scan. You can select what type of channels
should be tuned: Only encrypted channels, only free channels, or all channels.
Channel Store Type - Settings for Channel Scan. You can select what type of channels
should be stored after tuning fi nish: Only digital television channels, only radio channels,
or all channels.
Favourite Network Select - In some countries/areas more networks may be
available. Channels will be ordered diff erently according to selected network.
Channel Skip - Allows you to choose channels, which will be skipped when pressing
[CH+ / CH-] buttons on the remote.
Channel Sort - Allows you to swap position of two channels between each other.
Channel Move - Allows you to move selected channel to new position.
Channel Edit - Allows you to delete channels from the channel list.
Analogue Channel Fine-tune - Allows you to fi ne-tune analogue channels to adjust
picture quality.
Clear Channel List - Removes the channel list data.
or online at www.bush-support.co.uk.