Table of Contents
Advertisement
Getting to know your TV
You'll be up and running in no time
License Notification
The terms HDMI, HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc.
Manufactured under license from Dolby Laboratories.
Dolby, Dolby Audio, Dolby Vision, and the double-D
symbol are trademarks of Dolby Laboratories. Confidential
unpublished works. Copyright ©1992-2019 Dolby
Laboratories. All rights reserved.
YouTube and the YouTube logo are trademarks of Google
Inc.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, the
Symbol, & DTS and the Symbol together are registered
trademarks, and DTS TruSurround is a trademark of DTS,
Inc.
©
DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured
under license from DTS Licensing Limited. DTS, DTS-HD,
the Symbol, & DTS or DTS-HD and the Symbol together
are registered trademarks of DTS, Inc.
Reserved.
This product contains technology subject to certain
intellectual property rights of Microsoft. Use or distribution
of this technology outside of this product is prohibited
without the appropriate license(s) from Microsoft.
Content owners use Microsoft PlayReady™ content
access technology to protect their intellectual property,
including copyrighted content. This device uses
PlayReady technology to access PlayReady-protected
content and/or WMDRM-protected content. If the device
fails to properly enforce restrictions on content usage,
content owners may require Microsoft to revoke the
device's ability to consume PlayReady-protected content.
Revocation should not affect unprotected content or
content protected by other content access technologies.
Content owners may require you to upgrade PlayReady to
access their content. If you decline an upgrade, you will
not be able to access content that requires the upgrade.
The "CI Plus" Logo is a trademark of CI Plus LLP.
or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 604 0105.
This product is protected by certain intellectual property
rights of Microsoft Corporation. Use or distribution of such
technology outside of this product is prohibited without
a license from Microsoft or an authorized Microsoft
subsidiary.
Antenna Connection
Connect the aerial TV plug to the AERIAL INPUT (ANT-TV)
socket located on
Rear side of the TV
connection is done, you can turn on the units and use
them.
Inserting the Batteries into the Remote
Remove the back cover to reveal the battery compartment.
You need to do the followings in order to do that:
• Place the tip of a pen or some other pointed object in
DTS, Inc. All Rights
©
the hole above the cover and press it down.
• Then press firmly on the cover and slide in the direction
of the arrow.
Insert two size AAA batteries. Make sure the (+) and (-)
signs match (observe correct polarity). Do not mix old
and new batteries. Replace only with same or equivalent
type. Place the cover back on.
A message will be displayed on the screen when the
batteries are low and must be replaced. Note that when
the batteries are low, the performance of the remote
control may be impaired.
Batteries should not be exposed to excessive heat such
as sunshine, fire or the like.
Power Connection
IMPORTANT: The TV set is designed to operate on a
220-240V AC, 50 Hz supply. After unpacking, allow the
TV set to reach the ambient room temperature before
you connect the set to the mains. Plug the power cable
to the mains socket outlet.
the rear side of
the TV.
ANT-TV
If you want to connect a device to the TV, make
sure that both the TV and the device are turned
off before making any connection. After the
Getting to know your TV
11
Advertisement
Table of Contents
