Sound - Bush HA42U5232MEKB Instruction Manual

Advanced features
Getting the most from your TV

Sound

To enter this menu option, select the
control when in television mode, then go to Settings > Device Preferences > Sound.
In this menu you can adjust the various sound settings of your television. Adjustments are possible in the User
mode only as this will allow you to change the sound settings to your personal preference. These settings are saved
automatically. In other modes, the set will default to the predetermined levels if adjusted.
If you require any technical guidance or fi nd that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
66 Advanced features
icon while on the Home Page or press the [MENU] button on the remote
Sound Style – Sets the sound mode.
Options are:
User (default) – Defi ned sound response by the user.
Standard – Standard settings.
Vivid – Brighter sounding audio.
Sports – Ideal for sports events.
Movie – Enhanced for movie experience.
Music/News – Tailored for speech.
Balance – Left to right balance control.
Equalizer Detail – Fine control of the frequency response. Bands you can adjust are:
120 / 500 / 1500 / 5000 / 10000Hz
Speakers – Internal or external speaker control.
Options Are:
TV Speakers – TV speakers on.
External Audio System – TV speakers off .
Digital Output – Type of encoding for optical digital output.
Options are:
Auto – Automatically selects from input source.
Bypass – Audio directly comes from connected device.
PCM (default) – PCM encodes stream only.
Dolby Digital Plus
Dolby Digital
– Dolby Digital only.
®
SPDIF Delay – Audio delay for the digital optical output. 0 to 250ms.
Auto Volume Control – Automatic volume control on/off .
Downmix Mode – Set the downmix mode to Stereo / Surround.
DTS DRC – Turns Digital True Sound Dynamic Range Control on/off .
DTS Virtual-X
– Turns Digital True Sound on/off . Options are: Virtual:X / TBJDX /
®
Limiter.
Reset to Default – Allows you to reset the sound conditions back to their default
(factory) levels.
or online at www.bush-support.co.uk.
– Dolby Digital Plus only.
®