Formatting Memory Device; Removing A Usb Memory Device - Bush HA42U5232MEKB Instruction Manual

Advanced features
Getting the most from your TV

Formatting Memory Device

In order to use a USB or SD card memory device, you will need to check the device is formatted correctly.
Insert the SD card or USB memory device into the television. The SD card input can be found on the side inputs.
Press the [HOME] button, then select: Settings > Device Preferences > Storage > the desired USB memory device or
SD card. Format the selected memory device as an internal storage device.
Note: Your Android TV formats the USB memory device or SD card into a proprietary format. When inserting the
USB memory device or SD card into a personal computer after adding apps to it, you will not be able to view the
contents of the USB memory device or SD card.
To use the USB memory device or SD card on a personal computer, you will need to reformat the USB memory
device or SD card which will erase any data stored on the USB memory device or SD card.
When you format a USB memory device or SD card, all data saved in the device will be deleted.
Back up your important data before formatting. Performing this procedure formats the USB memory device or SD
card for exclusive use with the television. Therefore, you may be unable to use the USB memory device or SD card
with a computer, etc.
Some apps cannot be moved to a USB memory device or SD card.
Some apps cannot be moved to a USB memory device or SD card as they are fundamental to the operation of the
set.

Removing a USB Memory Device

Press the [HOME] button, select Settings > Device Preferences > Storage > the desired USB memory device, then
select the option to remove it.
Note: The USB memory device is used only for saving apps. To use the USB memory device for other purposes, you
must format it again.
If you delete an app in the USB memory device using a computer, you will be unable to launch it from the television.
If you remove a USB memory device from the television, you will be unable to use the apps that were moved to the
USB memory device.
You cannot specify a USB memory device as the installation location of an app. First install the app on the television
as normal, and then move it to the USB memory device.
Depending on the television model, your set will be equipped with either an SD card slot or a Micro SD card slot.
Please ensure you use the correct type of SD card, corresponding to the available slot.
If you require any technical guidance or fi nd that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
40 Advanced features
or online at www.bush-support.co.uk.