Do you have a question about the VL19HDLED and is the answer not in the manual?
Questions and answers
Alan Hawkins
January 17, 2025
how do you reduce picture in frame?
1 comments:
Mr. Anderson
May 14, 2025
To reduce the picture size in the frame on the Bush VL19HDLED, adjust the "Aspect Ratio" setting. Follow these steps:
1. Press the MENU button to open the main menu. 2. Use the arrow buttons to select the Picture settings. 3. Navigate to "Aspect Ratio." 4. Change the setting from "Full" to a smaller option, if available (such as 4:3 or Zoom).
This will reduce the picture size within the screen frame.
Page 2
We’re here to help you get the most from your television. Should you require any guidance, a simple solution can often be found online at: www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105.
SCART Connections VGA Connections Standard features How to navigate menus - Selecting source Electronic programme guide (EPG) (DTV mode) Teletext (ATV mode) or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105.
Safety information Important - Please read these instructions fully before installing or operating Power source • Handle the power cord by the plug, do not unplug the TV by pulling the power cord. The TV should be operated only from a 220-240 V AC, •...
Page 7
• Before cleaning, unplug the TV from the wall socket. • Do not use liquid or aerosol cleaners. Only use a soft, dry cloth. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105.
Getting to know your TV You’ll be up and running in no time Ready? Let’s begin... Accessories Please read these instructions carefully. They contain important information which will help you get the best from your TV and ensure safe and correct installation and operation.
Avoid excessively warm locations to prevent possible 75 x 75mm VESA mount damage to the cabinet or premature component failure. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Getting to know your TV...
Getting to know your TV You’ll be up and running in no time Viewing remote control Power: Switches the TV between on and Mute: Mutes and restores standbymode. your TV sound. 0-9 Number Button: Press to select a programme. (ATV / DTVmode) -/-- : Press this button before entering a Return to the previous viewing channel.
3. CH+ Selects the next channel up 8. Standby LED/Remote Control Sensor 4. CH- Selects the next channel down or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Getting to know your TV...
Getting to know your TV You’ll be up and running in no time Viewing control panel AUDIO VGA IN SCART COAX OUT RF IN EARPHONE 9. Headphone jack 17. MINI YPbPr 13. COAXIAL Out 10. Audio in jack PC Monitor 18.
“ ” button on the right of the TV, the TV will then switch to standby mode. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Getting to know your TV...
Getting to know your TV You’ll be up and running in no time Operation using TV control buttons Operation using remote control The VOL+/VOL- buttons will function as volume up/ The remote control is designed to control all the down as default. Even if you set other functions for these functions of the model you selected.
Auto Scan Selects the auto scan type: DTV+ATV / DTV /ATV. Select LCN Type On or Off. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Getting to know your TV...
Connections Bringing it all together Left side connections explained 1. HDMI Input Connects a device that has an HDMI socket.The TV can display High Definition pictures from devices such as a High Definition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket.
TV with an appropriate aerial cable. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Connections...
Connections Bringing it all together HDMI Connections VGA Connections HDMI lets you enjoy high definition digital images and You can connect a computer (PC) to the TV to display high quality sound by connecting the TV to external your computer’s screen image on the TV. devices such as DVD players, set top boxes or gaming Power off both computer and TV before making any equipment.
Page 23
If you still require further assistance, call one of our experts on 0345 604 0105. Connections...
Standard features Simple everyday use How to navigate menus - Selecting 2. Press EPG button or EXIT button again to switch off EPG and return to normal TV viewing. source Info bar commands: 1. Press the INPUT button on the top o f the TV or the RED (Prev.
Press the SIZE button again. The bottom half of the page will be displayed in double height text. Press the SIZE button again to return to the full page. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Standard features...
Standard features Simple everyday use Digital Teletext (DTV mode) Recording Digital teletext can access special digital teletext services Recorded Time : 00 : 00 : 47 and specific services which broadcast digital teletext. Available Time: 3837 Minute 16 QVC You will need to turn off Subtitle Function before using A Traditional Christ teletext.
Channel Press the OK button and then press the buttons to select the channel that you want to record. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Standard features...
Standard features Simple everyday use Play Recorded Programme FileName Animals.AVI AudioCodec : VideoCodec : MPEG4 SampleRate : 44100 Hz Resolution 640 x 480 Bitrate : 4158120 bps Channel : You can play a recorded programme from the recorded programme list or from a USB Storage Device. 1.
Allows the selection of an equalizer mode: Off / Rock / Pop / Jazz / User. You can change the EQ value under User mode. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Standard features...
Standard features Simple everyday use Channel management (ATV / DTV Selects to turn On/Off Audio Volume Leveler. Mode) SRS Setting Selects to turn On/Off SRS default setting. Tuner Type 1. Press the MENU button to display the main menu. SPDIF Press the buttons to select Setup in the main menu, Select the digital audio output mode: Auto / Off / PCM.
Page 33
Press the buttons to select Channel in the main menu, then press the or OK button, it will highlight the first option. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Standard features...
Page 34
Standard features Simple everyday use Auto Channel Update 1. Press the MENU button to display the main menu. Press the buttons to select Channel in the main Channel menu, then press the or OK button, it will highlight Tuner Type Cable Auto Scan...
Page 35
Favorite Manager button again to confirm the new name. Common Interface Signal Information Move OK: Select MENU: Return EXIT: Exit or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Standard features...
Page 36
Standard features Simple everyday use 3. A Common Interface main menu will pop up. Press 2. Insert the Common Access Module into the slot. Flip the buttons to select the items and press the OK the Common Access Module to another side and try button to confirm.
EXIT: Exit 3. Press the buttons to select your desired Audio Primary Language. Press thebutton and then press or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Standard features...
Page 38
Standard features Simple everyday use thebuttons to select your desired Audio Secondary Subtitle Secondary Language Language. Press the buttons to select your desired subtitle secondary language. Hearing Impaired Press thebuttons to turn On/Off hearing impaired. Audio Languages Audio Primary Language English Audio Secondary Language English...
Page 39
3. Press the buttons to select the following PVR File Off/5/15/…/120/240mins. System options and then press the OK button. or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Standard features...
Page 40
Standard features Simple everyday use File Manager Select File Manager to display the recorded programme list, press the buttons to select the recorded programme and then press the OK or II button to Setup view. First Time Setup Reset File Manager Scheduled Record Standby...
6/12 Resolution 1366x768 5_1366x768x24b.jpg OK Slide Show / Single view Previous / Next Rotate EXIT Back EPG Quick Menu or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Standard features...
Page 42
Standard features Simple everyday use 6. Press the OK button or the INFO button to display the 5. Press the II or OK button to start to play. function bar: Silde Show / Single view / Previous / Next / Music Rotate / Quick Menu (Interval Time / Repeat / Slideshow USB1/Music/Call Me Maybe.mp3...
Page 43
OK button. Text USB1 USB1 Move Change Page OK Selete EPG Quick Menu EXIT Return or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Standard features...
Other information Helpful technical information Specifications TV Broadcasting PAL, B/G, D/K, I, SECAM, L/L’ Receiving Channels VHF (BAND I/III) - UHF (BAND U) - HYPERBAND Number of Preset Channels Channel Indicator On Screen Display RF Aerial Input 75 Ohm (unbalanced) Operating Voltage AC 100-240V~ 50/60Hz Audio...
• The on-mode power consumption • The annual energy consumption • The screen resolution in physical horizontal and vertical pixel count or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Other information...
Product support Help is always at hand Trouble shooting Input sources - can not be selected 1.If you cannot select an input source, it is possible that no device is connected. Image persistence - ghosting 2.Check the AV cables and connections if you have tried Please note that ghosting may occur while displaying a to connect a device.
Page 51
For more information, please contact the local authority indicates that this battery contains lead. or the dealer where you purchased the product. Products Battery or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Product support...
Troubleshooting section of these instructions or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105* . To help give us give you a fast and efficient service please have the following information ready: Model Ref.
Ga. Ficidelit facimin. If you are creating instructions, you may find the following links helpful: www.environmentlaw.org.uk www.hse.gov.uk/waste/waste-electrical or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105. Product support...
Page 54
Help is always at hand Call us now and activate your 12 month guarantee Thank you for choosing Bush. Your new product is guaranteed against faults and breakdowns for 12 months. Don’t forget to register it with us today so we can provide you with our best possible after-sales service and useful updates.
Page 55
If you still require further assistance, call one of our experts on 0345 604 0105. Product support...
Need help?
Do you have a question about the VL19HDLED and is the answer not in the manual?
Questions and answers
how do you reduce picture in frame?
To reduce the picture size in the frame on the Bush VL19HDLED, adjust the "Aspect Ratio" setting. Follow these steps:
1. Press the MENU button to open the main menu.
2. Use the arrow buttons to select the Picture settings.
3. Navigate to "Aspect Ratio."
4. Change the setting from "Full" to a smaller option, if available (such as 4:3 or Zoom).
This will reduce the picture size within the screen frame.
This answer is automatically generated