Speakers; Power - Bush HA42U5232MEKB Instruction Manual

Android Functionality
Advanced features
Getting the most from your TV

Speakers

To enter the Speakers menu, press the [SOURCE] button and select TV. Then press the [MENU] button and select
Speakers using the [LEFT/RIGHT ARROW] buttons and pressing [OK] when selected.
Note: The volume level at which your set comes on at is the same level it was when turned off .

Power

To enter the Power menu, press the [SOURCE] button and select TV. Then press the [MENU] button and select
Power using the [LEFT/RIGHT ARROW] buttons and pressing [OK] when selected.
In this menu you can change the settings related to power consumption and the following modes are available:
If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line. (Calls are charged at the standard rate of your network provider).
Switch between speakers:
TV speakers - Audio will come from the television.
External Audio System - Audio will come from the external audio device (e.g.
soundbar, AV receiver) when connected via one of the digital audio outputs.
Sleep Timer - Lets you set the sleep timer so the television automatically switches off
after a set amount of time.
Off / 10 / 20 / 30 / 40 / 50 / 60 / 90 / 120 minutes can be selected.
Picture Off - Allows you to turn off the display so that there is no picture,sound still
comes from the speakers. To turn display back on, press the [STANDBY] button on
the remote control.
Switch Off Timer - Controls the amount of time the set will continue without any
buttons being pressed on the set or remote control before going into standby.
Off / 30 / 60 / 90 / 120 / 150 / 180 / 210 / 240 minutes can be selected. Default is Off .
No Signal auto-power off - Controls the amount of time the set will stay powered on
without a signal being received.
Off / 5 / 10 / 15 / 30 / 60 minutes can be selected. 15 minutes is default.
Advanced features 47