Chemical Filter (Optional Accessory) - Teledyne Everywhereyoulook GT-FIRE User Manual

GT-FIRE
PORTABLE GAS DETECTOR

6.3.3. Chemical Filter (optional accessory)

The Chemical Filter assembly (Part no. 67142) is available as an accessory. The filter contents can
be replaced with any of the following:
• Charcoal Granules (part no. 67148)
Charcoal removes higher hydrocarbons from the sample.
• Silica Gel (part no. 67205)
Silica Gel removes moisture from a sample.
The Gel will change colour from gold to green when saturated and replacement is required.
• NOx absorber (part no. 67270)
The NOx absorber will remove Nitric Oxide (NO) and Nitrogen Dioxide (NO
sample.
The absorber will change colour from dark purple to brown when saturated and replacement
is required.
Caution: The contents of this filter must only be replenished with Teledyne
GMI approved chemicals.
Note: When replacing the chemical filter, you must also replace the dust filter.
1. Remove and discard the dust filter, as detailed in
2. Remove the probe adaptor from the chemical filter assembly, as shown in
Removal.
3. Unscrew the chemical filter assembly from the hydrophobic filter bulb, as illustrated in
47: Filter Removal.
38
Section 6.3.1 Dust
Figure 45: Filter Removal
) from a
2
Filter.
Figure 45: Filter
Figure
67816
Revision D