Table of Contents
Advertisement
Figure 41: Charging Station - Monitor Location
6.1.2.3. 12V / 24V Vehicle Charger
The 12V / 24V Vehicle Charger (shown in
charging the monitor from a vehicle cigarette lighter socket.
A red LED on the charger plug indicates 'power on'.
6.2. Cleaning
Caution: Do not use agents containing silicon or solvent to clean the
monitor as these may damage the flammable gas sensor.
Do not use abrasive materials or strong volatile chemical solutions as
these could damage the impact resistant casing.
The outer, impact resistant casing of the monitor may be cleaned using a non-abrasive moist cloth.
Rub the cloth over the outer casing to remove any dirt. A mild soap solution may be used with a
non-abrasive cloth to remove more stubborn marks.
67816
Revision D
Figure 42: Vehicle Charger
Figure 42: Vehicle Charger Lead
GT-FIRE
PORTABLE GAS DETECTOR
Lead) provides the option of
35
Advertisement
Table of Contents
