Table of Contents
Advertisement
GT-FIRE
PORTABLE GAS DETECTOR
The green 'Power' LED is on during charging.
When charging is complete, the screen shown in
Figure 35: Charging Complete
is displayed.
Figure 35: Charging Complete
If 'CHARGING TERMINATED' is displayed, as shown in
Figure 36: Charging
Terminated, an
excessive charge voltage exists that may have been caused by attempting to charge Alkaline
batteries. The orange (fault) LED will also be ON.
Figure 36: Charging Terminated
6.1.2.1. Standard Monitor Charger (Universal Plug)
To connect Standard Charger to the monitor:
1. Lift dust cover from charger socket on rear of monitor. Connect charger plug, as shown in
Figure
37: Connect Charger to
Monitor.
Figure 37: Connect Charger to Monitor
2. Connect charger to mains supply.
The charging period may vary depending upon operational conditions such as temperature and
the condition of the batteries.
32
67816
Revision D
Advertisement
Table of Contents
