Teledyne Everywhereyoulook GT-FIRE User Manual page 34

GT-FIRE
PORTABLE GAS DETECTOR
2. Ensure the monitor is switched OFF.
3. Locate the hole on the base of the monitor handle and insert onto the charging station, refer to
Figure 38: GT Series Charging
4. Secure monitor into the storage clip and engage securing strap, refer to
Station - Monitor Location.
Figure 40: Charging Station - Monitor Location
5. Secure the probe in the charging station, as shown in
6. Connect power supply, (Universal Power Supply (part no. 12444) or 12V Vehicle Power
Supply (part no. 12988)) to Charging Station as shown in
Station.
34
Station.
Figure 38: GT Series Charging
Figure 40: Charging
Figure 41: Power Supply to Charging
Station.
67816
Revision D