Power To Five Slot Charge Only Cradle; Figure 2-13 Multi Slot Charge Only Cradle Four Slot Battery Charger Installation - Motorola MC40 Integrator Manual

MC40 Integrator Guide
Procedure Steps
1 Install a Battery Charger Cup. See
Align the mounting slots on the bottom of the Four Slot Battery Charger with the screws on the cup.
2
3 Slide the Four Slot Battery Charger down until it snaps into place.

Figure 2-13 Multi Slot Charge Only Cradle Four Slot Battery Charger Installation

2.4.3 Power to Five Slot Charge Only Cradle

Use one power supply to provide power to the Charging Base to power the Charging Cups. A separate power
supply is required for each Four Slot Battery Charger installed. The power supply is connected directly to the
For Slot Battery Charger.
2-14
2.4.1 Installing a Cup, page 2-11.
MN000112A01 - September 2013