Figure 5-1 Wlan Network Security Dialog Boxes - Motorola MC40 Integrator Manual

MC40 Integrator Guide
4 Scroll through the list and touch the desired WLAN network.

Figure 5-1 WLAN Network Security Dialog Boxes

5
Touch Show password checkbox to display password as it is entered.
Enter the required password. or other credentials then touch Connect. See the system administrator for more
information.
6 The MC40 obtains a network address and other required information from the network using the dynamic host
configuration protocol (DHCP) protocol. To configure the MC40 with a fixed internet protocol (IP) address,
see the MC40 Integrator Guide.
The MC40 obtains a network address and other required information from the network using the dynamic host
7
configuration protocol (DHCP) protocol. To configure the MC40 with a fixed internet protocol (IP) address,
see the MC40 Integrator Guide.
8 When the device connects to the network, the network name appears at the top of the list and Connected
appears below the network name.
5-2
MN000112A01 - September 2013