Ten Slot Charge Only Cradle - Motorola SB1 User Manual

4 - 4 SB1 User Guide

Ten Slot Charge Only Cradle

CAUTION
Use the Ten Slot Charge Only cradle to charge up to ten SB1s simultaneously. To charge the SB1:
Ten Slot Charge Only Cradle
Figure 4-3
If attached, remove the SB1 from the lanyard or holster tether.
1.
Slide the SB1 into the slot with the Scan button facing up.
2.
Push down on the SB1 until it snaps into place. Verify the SB1 is secure in the slot.
3.
NOTE If an Headset Adapter or Speaker Adapter is attached to the SB1 when placed into the cradle, the SB1
beeps indicating that the audio functionality has been disabled.
If the SB1 is playing audio when it is inserted into the cradle, the audio is muted and un-muted when the
SB1 is removed from the cradle.
Ensure that you follow the guidelines for battery safety described in
5-1.
Battery Safety Guidelines on page