MC40 Integrator Guide
1
Touch Criteria.
Figure 4-17 Criteria Screen
2
Touch String to check for option to specify the string that must be present in the data.
3
In the Enter the string to check for dialog box, enter the string
4
Touch Done.
5
Touch OK.
Touch String position option to specify the position of the string specified in the String to check for option.
6
The ADF rule is only applied if the specific string in String to check for is found at the specified String
position location (zero for the start of the string).
7
Touch the + or - to change the value.
8
Touch OK.
Touch String length option to specify a length for the received data. The ADF rule only applies to the bar code
9
data with that specified length.
10 Touch the + or - to change the value.
11 Touch OK.
4-28
MN000112A01 - September 2013