Bar Code Input; Figure 4-7 Profile Configuration Screen - Motorola MC40 Integrator Manual

Figure 4-7 Profile Configuration Screen

The configuration screen lists the following sections:
• Profile enabled
• Applications
• Barcode Input
• MSR Input
• Keystroke output
• Intent Output
• IP Output.

4.6.1 Bar Code Input

Use the Bar Code Input options to configure the Bar Code Scanner Input Plug-in for the profile.
Enabled
Enables or disables this plug-in. A check in the checkbox indicates that the plug-in is enabled.
Scanner Selection
Configures which scanning device to use for bar code data capture when the profile is active.
• Auto - The software automatically selects the 2D Imager.
• Camera scanner - Scanning is performed with the rear-facing camera.
• 2D Imager - Scanning is performed using the 2D Imager.
MN000112A01 - September 2013
4.6.1 Bar Code Input
4-9