Adding Packages; Figure 6-2 User Manager Window - Motorola MC40 Integrator Manual

Procedure Steps
1 Click + above the Users list box.

Figure 6-2 User Manager Window

2 In the Username text box, enter a user name. The text is case sensitive and required.
3 In the Password text box, enter a password for the user. The text is case sensitive and required.
4 In the Retype Password text box, re-enter the user password.
Select the Admin checkbox to set the user to have administrator rights.
5
6 Select the Enabled checkbox to enable the user.
7 Click OK.
8 Repeat steps 1 through 7 for each additional user.

6.4.2 Adding Packages

All system applications that are on the default image are available to all users.
Create a list of installed applications (packages) on the device that are available for use by all the users.
MN000112A01 - September 2013
6.4.2 Adding Packages
6-3