Charging The Battery; Charging The Main Battery; Four Slot Charge Only Cradle - Motorola MC65 User Manual

Inserting the Battery
Figure 1-7
The MC65 powers up automatically after inserting the battery if the battery has been charged previously.

Charging the Battery

CAUTION Ensure that you follow the guidelines for battery safety described in

Charging the Main Battery

Before using the MC65 for the first time, charge the main battery until the amber Charging/Battery Status LED
remains lit (see Table 1-2 on page 1-8
with the appropriate power supply. For information about the accessories available for the MC65, see
Accessories.
For cable and cradle setup and charging procedures refer to the MC65 Integrator Guide.
•
USB Charging Cable
•
Charge Only Cable
•
Single Slot USB Cradle
•

Four Slot Charge Only Cradle

•
Four Slot Ethernet Cradle.
To charge the main battery:
Connect the charging accessory to the appropriate power source.
1.
Insert the MC65 into a cradle or attach to a cable. The MC65 begins charging. The Charging/Battery Status
2.
LED blinks amber while charging, then turns solid amber when fully charged. See
indications.
Battery Release Latch
2
1
for charge status indications). To charge the MC65, use a cable or a cradle
Getting Started
NEED WAN
DRAWING
Battery
Battery Safety Guidelines on page
Chapter 6,
Table 1-2 for charging
1 - 7
7-2.