Msr Input; Keystroke Output - Motorola MC40 Integrator Manual

– Enable - Enables decoding of only inverse 1D bar codes.
– Auto - Allows decoding of both twice positive and inverse 1D bar codes.
• Viewfinder Mode - Configures the Viewfinder modes supported for camera scanning.
– Viewfinder Enabled - Enables only the viewfinder.
– Static Reticle - Enables the viewfinder and a red reticle in the center of the screen which helps selecting
the bar code (default).
Scan Params
Allows the configuration of Code ID and decode feedback options.
• Code ID Type - A Code ID character identifies the code type of a scanned bar code. This is useful when the
reader is decoding more than one code type. Select a code ID character to insert between the prefix and the
decoded symbol.
– Code ID Type None - No prefix (default).
– Code ID Type Aim - A standards based three character prefix.
– Code ID Type Symbol - A Symbol defined single character prefix.
Not all ringtones are fully supported as decode tones and those of longer length may be truncated
when used as a decode tone. The recommendation is to test the selected tone for operation before
deployment to a customer site.
• Decode Audio Feedback - Select an audio tone to sound upon a good decode.
• Decode Haptic Feedback - Enable the device to vibrate upon a good decode (default - enabled).

4.6.2 MSR Input

Use MSR Input options to configure the MSR Input Plug-in for the profile.
• Enabled — Enables or disables this plug-in. A check in the checkbox indicates that the plug-in is enabled.

4.6.3 Keystroke Output

Use to configure the Keystroke Output Plug-in for the profile.
• Enabled — Enables or disables this plug-in. A check in the checkbox indicates that the plug-in is enabled
(default - enabled).
• Action key character - Enables decoding of a special character embedded within a bar code or MSR data for use
in native Android applications. This feature is helpful when populating or executing a form.
– None - Action key character feature is disabled (default).
– Tab - Tab character code in a bar code is processed. When DataWedge detects this character code in a bar
code, move the focus to the next field.
– Line feed - Line feed character code in a bar code is processed. When DataWedge detects this character
code in a bar code, move the focus to the next field.
MN000112A01 - September 2013
4.6.2 MSR Input
4-17