Changing The Instrument Firmware Configuration - Promega Maxwell 16 MDx Operating Manual

7.B. Changing the Instrument Firmware Configuration
Resetting the Maxwell
The Maxwell Wizard can be reset. Select Setup in the Home screen, and Service mode in the Maxwell
®
Configuration screen. Enter the Administrator PIN. In the Utilities Menu screen, select Reset Wizard. Two
options are available. Selecting Wizard only resets the Wizard. The Wizard will run upon restart, and all user
and user protocol information will be retained. Selecting the All Settings option in the Reset Wizard screen
resets the Wizard and removes all users and user protocols.
!
Important. Removing all settings takes a few minutes. Please wait.
Changing Configuration Settings
To change a subset of parameters, select Configuration from the Maxwell
!
Important. You may need to scroll down the screen to see all of the options.
1. Changing the Language. Select the Select Language option in the Configuration screen, and select the
required language. The display will change over to the selected language.
2. Recalibrating the Touch Screen. Select the Touch Screen Setup option in the Configuration screen.
Follow the screen calibration method described in Section 4.E.
Changing the Date/Time. The Maxwell
3.
time. Select the Setup Local Time option in the Configuration screen. To update, follow the date/time
setup method described in Section 4.E.
Changing the UV Treatment Settings. Selecting the UV Settings option in the Configuration screen
4.
allows you to set the UV settings in the Maxwell
5. Changing the Sample Tracking Settings. Selecting the Sample Tracking option in the Configuration
screen allows you to change the sample tracking options.
36
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM320 · Revised 4/15
Wizard
®
Figure 32. Configuration screen.
16 MDx Instrument does not track leap years or daylight saving
®
16 MDx Instrument as described in Section 4.E.
®
16 Configuration screen.
®
16
®
www.promega.com