Environmental Requirements (Operating, Shipping And Storage Conditions) - Promega Maxwell 16 MDx Operating Manual

1.F. Environmental Requirements (operating, shipping and storage conditions)
Power Requirements:
Temperature:
Humidity:
The Maxwell 16 MDx Instrument is intended for indoor use only. Wipe up spills immediately. Install the
®
instrument on a clean, level surface. To avoid shortening the expected lifespan of the instrument, install in a
location that meets the following criteria:
• Locate on a sturdy, level surface.
• Avoid dusty areas.
• Choose a location that has good air circulation and is not exposed to direct sunlight.
• Avoid noisy electrical power sources (e.g., power generators).
• Do not install in a location where there is large temperature variability or high humidity.
• Position the instrument so that it is easy to unplug from the power source.
• Do not place next to heat sources.
• Do not use near flammable gases or liquids.
• Do not place near other electrically sensitive instruments.
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
www.promega.com
100–240VAC, 50–60Hz, 2.1A
5–40°C
Up to 80% relative humidity (for operation, shipping and storage)
9
TM320 · Revised 4/15