Static Routes/Private; Ip/Ip Router; Ip Router/Mode; Ip/Rip - ADTRAN Express 4100 User Manual

IP/IP Router

61200176L2-1

Static Routes/Private

Write security: 4; Read security: 5
When set to No, the Express 4100/4110 will advertise this static route
using RIP. Otherwise, setting to Yes means that the route is kept private.
The IP router is configured under this menu as follows.

IP Router/Mode

Write security: 3; Read security: 5
When this option is set to On (def), the Express 4100/4110 will advertise
and listen to routes from other IP routers. If Off, the route table is still
used but only static routes are used for routing IP packets and only the
Ethernet port is used. IP packets can be sent over the WAN, but only
when bridged.

IP/RIP

Write security: 3; Read security: 5
The Routing Information Protocol (RIP) is supported by the Express
4100/4110. The following parameters are required for setting up the
mode on the Ethernet port:

RIP/Mode

Write security: 3; Read security: 5
This option turns RIP On (def) or Off.

RIP/Protocol

Write security: 3; Read security: 5
Version can be V1 (def) or V2.

RIP/Method

Write security: 3; Read security: 5
Split Horizon
Poison Reverse
(def)
Express 4100/4110 User Manual
Chapter 3. Terminal Menu Operation and Structure
Only routes not learned on the Ethernet
port are advertised.
All routes are advertised, including
routes learned from the Ethernet port.
These routes are poisoned.
3-17