Appendix B. Log Messages
DHCP socket failed
DHCP: Host not added to ARP table
Installing bad default route: ifnum=<inter> metric=<hops> gw=<ip>
Rejecting packet with Source Routing option - src=<srcip> dest=<destip>
setmask: local IP iface(0), not done
syslog: bad host
syslog: no port
TEL: Telnet Session Closed
B-18
level 1
Internal error occurred when attempting to start DHCP server.
level 2
The DHCP server could not add requesting host to ARP table.
level 6
The Express 4100/4110 did not install a default route because the <inter>
or <hops> was zero.
level 4
The Express 4100/4110 has dropped a source routed IP packet due to
invalid parameters.
level 6
Debug error used in determining router stack problems.
level 2
Syslog function cannot use host name or IP set in Configuration/Logs/
Syslog Host.
level 2
Syslog function cannot open port to send Log entries.
level 4
Telnet server session has been closed.
Express 4100/4110 User Manual
61200176L2-1
Need help?
Do you have a question about the Express 4100 and is the answer not in the manual?
Questions and answers