ADTRAN Express 4100 User Manual page 153

Caller ID mismatch
CallID 1 in use
CallID 2 in use
Can't answer, Call not ringing
Cause: '<cause>' diag=<num>
61200176L2-1
level 3
The caller ID number did not match the numbers placed in Configura-
tion/Connection List/Authentication parameters Call ID 1 or Call ID 2.
level 2
An outgoing call on LDN 1 was dumped because it was already busy
with a call.
level 2
A outgoing call on LDN 2 was dumped because it was already busy with
a call.
level 1
Internal error as a result of trying to answer a non-existent incoming call.
level 3
The ISDN switch has sent a Cause information element describing the
reason reported from the ISDN switch as <cause> for a call failure. The
value <num> is the diagnostic which can be helpful for diagnosing by the
telephone company or ADTRAN technical support. The following will
be reported for the <cause> value:
BAD_INFO_ELEM
BEAR_CAP_NOT_AVAIL
BEARER_CAP_NOT_AUTH
CALL_REJECTED
CAP_NOT_IMPLEMENTED
CHAN_DOES_NOT_EXIST
CHAN_NOT_IMPLEMENTED
Express 4100/4110 User Manual
Appendix B. Log Messages
B-9