Ordering Isdn; Interoperability; Connecting To The Internet - ADTRAN Express 4100 User Manual

Isdn router/bridge
Table of Contents

Advertisement

Ordering ISDN

Interoperability

Connecting to the Internet

61200176L2-1
Chapter 1. Understanding ISDN and the Express 4100/4110
When ordering ISDN from the telephone company, request EZ-ISDN 1
(Capability Package U) to ensure it is set up properly. EZ-ISDN 1 is rec-
ommended by the industry for most home office/small business applica-
tions. If this is not available from your service provider or you would
like more information regarding ordering ISDN, see the ADTRAN docu-
ment Ordering ISDN Service User Guide part number 60000.015-8 or con-
tact your telephone company for alternative line configurations. The
Ordering ISDN Service User Guide is available on the ADTRAN home page
at http://www.adtran.com or by calling ADTRAN.
The Express 4100/4110 is standards based and uses PPP developed by
Internet Engineering Task Force (IETF). PPP provides a standard method
of transporting multiprotocol datagrams over point-to-point links. PPP is
widely accepted by many ISDN bridge/router manufacturers. The
Express 4100/4110 will negotiate Multilink PPP when connecting both B-
channels. The Bandwidth Allocation Protocol (BAP) may also negotiate,
which enhances the management of adding and removing a B-channel.
Data compression is also supported using LZS
Internet Service Providers (ISPs) assign an IP address to use when con-
nected to their service using PPP negotiation. This assignment is based
on the assumption that the user has an ISDN terminal adapter running
PPP async-to-sync conversion or another rate adaption where the PPP
negotiation is terminated inside the PC's IP stack. However, if an ISDN-
Ethernet gateway device is used, the ISP must preassign the customer a
subnet which uses multiple IP addresses. This may result in a much
higher cost to the user.
The Express 4100/4110 permits the user to assign any IP addresses to the
unit and computers. Operations on the network can occur normally. In
fact, one B-channel can connect to the ISP using NAT while the other B-
channel connects to another "private" or "fake" network. All packets
transmitted or received over the ISP connection are translated. The
Express 4100/4110 keeps track of the computers that request services
over the Internet. A web server address can be assigned under the Con-
Express 4100/4110 User Manual
technology from hi/fn™.
®
1-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express 4110

Table of Contents