Filters/Dem Dial Exceptions - ADTRAN Express 4100 User Manual

Chapter 3. Terminal Menu Operation and Structure
3-56
overhead traffic like certain broadcast and multicast packets. There are
three possible selections for this parameter:
Disabled (def)
Ignore All
Demand All

Filters/Dem Dial Exceptions

Write security: 2; Read security: 5
This is a list of up to 32 filter entries. The setup is exactly the same as the
Filter/In Exceptions list.
Express 4100/4110 User Manual
Turns off demand dial filtering. No packets
cause demand dialing for this profile and all
outgoing and incoming packets reset the idle
timer.
When connected in any mode (Bridge, IP
Router, or IPX router), the idle timer is reset
only when there is a match in the Filters/
Dem Dial Exceptions list. When not con-
nected in Bridge mode only, causes the
Express 4100/4110 to dial using this Con-
nection List profile if there is a match in the
Filters/Dem Dial Exceptions.
When connected in any mode (Bridge, IP
Router, or IPX router), the idle timer is always
reset except when there is a match in the Fil-
ters/Dem Dial Exceptions list. When not
connected in Bridge mode only, causes the
Express 4100/4110 to dial using this Con-
nection List profile if there is NOT a match in
the Filters/Dem Dial Exceptions list.
61200176L2-1