Filter Defines /Ipx Filter Defines - ADTRAN Express 4100 User Manual

Chapter 3. Terminal Menu Operation and Structure
3-34
Dst Port IP destination port number used for comparison
Range: 0 to 65535. (decimal format)
Type of comparison that is performed
Dst Port Cmpr
= means ports equal to
not = means port not equal to
> means port greater than
< means port less than
None means the destination port is not com-
pared
Proto Protocol used for comparison. Range: 0 to
255. (decimal format)
Type of comparison that is performed
Proto Cmpr
= means protocols equal to
not = means protocols not equal to
> means protocols greater than
< means protocols less than
None means the protocol is not compared
TCP Est Yes - only when TCP established
No - only when TCP not established
Ignore - ignore TCP flags

Filter Defines /IPX Filter Defines

Write security: 2; Read security: 3
The IPX filter defines apply to any IPX packet whether it is routed or
bridged. Also, any IPX encapsulation type will be accounted for. Up to 32
IPX defines can be specified.
Name Identifies the filter entry (15 characters max)
Src Net 32-bit source network address
Src Mask Bits in the source network address which are
compared. (hexadecimal format)
Dest Net 32-bit destination network address
Dest Mask Bits in the destination network address which
are compared. (hexadecimal format)
Express 4100/4110 User Manual 61200176L2-1