Network Log Messages - ADTRAN Express 4100 User Manual

SOURCE NOT ISDN
Signal 0xNN
Transfer <number>
Transfer Rej <number>

Network Log Messages

Attempting to add bad IP iface route: ifnum=<inter> dest=<ip>
DHCP couldn't alloc mem
DHCP response sent
61200176L2-1
level 4
The incoming calling party is not ISDN. This is a warning and is most
often seen for POTS calls.
level 4
A signal information element was received from the ISDN switch with
the value NN in hexadecimal.
level 5
The Express 4100/4110 has transferred the held call with the active call.
If no caller ID is available for the ISDN line, then <number> will be blank
for incoming calls.
level 5
The Express 4100/4110 attempted to transfer but was rejected by the
ISDN switch. If no caller ID is available for the ISDN line, then <num-
ber> will be blank for incoming calls.
level 4
An IP address <ip> could not be used for the interface number <inter>.
level 1
A DHCP response could not be generated due to memory allocation
problems.
level 4
A DHCP response was successfully sent to requesting device.
Express 4100/4110 User Manual
Appendix B. Log Messages
B-17