Table of Contents
Advertisement
Configure item
High speed counter
Frequency
Compare value
Relative and absolute
Interrupt address
Circulate
Cam
Method 2: make the program
Function
Choose HSC, the range is from HSC0 to HSC18
Choose the HSC frequency doubling (2 or 4)
The value can be register or constant, in this example, when the
counting value reaches compare value, HSC0 is ON. here the compare
value is 200000 which is saved in D10.
The HSC is relative mode or absolute mode
The starting registers to store 100 segments interruption preset value
100 segments interruption mode is cycle or not
The cam function is executed when any set value of 100-segment high
speed counting interruption equals the counting value.
206
Advertisement
Table of Contents
