8. Clean all optical surfaces before and after splicing.
9. Splice the incoming fiber to the Optical Fiber of the OptiTap Connector using a Fiber
10. Using the Fiber Jumper (P/N 1062737145), connect one end to the Optitap Connector and
11. Install the cover on the Fiber Tray.
612877SBONT-5B
Optical Fusion Splice Tool.
the other to the Optical Connection on the bottom of the Electronics Module.
Splice Tray
Fiber
Jumper
Fiber In
Section 2, Small Business Unit Installation - Installation
TOTAL ACCESS 372
1287722G1
TELEPHONE TROUBLESHOOTING:
1. Identify the bad line (POTS 1-8).
2. Plug any working phone into
the appropriate jack.
If the telephone works, the unit
is functioning normally.
If the telephone does not work,
contact your service provider.
3. Remove the telephone from the
POTS jack.
N
T E
R
F
Figure 2-16. OptiTap Installation
Optical
Connection
Note: Cable color for
clarity purposes only.
2-25