Hanging The Fan - Casablanca Verrazano Owner's Manual

V
ERRAZANO
Step 5. To hang the fan body in the canopy, hold the fan
body firmly and insert the nylon ball into the canopy open-
ing. Rotate fan body until slot on nylon ball fits into pin
opposite canopy opening.
NOTE: The fan weight is 37.5 pounds.
BLACK
YELLOW RED
BLACK
• The fan must be supplied with three
independent 120V AC supply wires to provide
power for the fan, the light, and neutral.
• The fan may be turned ON and OFF by the
W-18 / W-28 wall control.
• The lights may be turned ON and OFF by the
W-18 / W-28 and the intensity adjusted from
low to high.
Installation is to be in accordance with the
National Electrical Code, ANSI/NFPA 70-1993
and local codes
6
™

HANGING THE FAN

BALL
W-18 / W-28 WIRING
BLACK &
YELLOW
2 WHITE
RED AND
BLUE D-1
3 GREEN
Step 6a. Connect the fan wires to the outlet box wiring by
placing the bare ends of the wires together and then securing
with a wire nut.
Connect in this order:
• GREEN leads from mounting plate and fan to GREEN
GROUND conductor of power source. Secure with wire
nut.
• WHITE wire from fan to WHITE NEUTRAL wire in ceil-
ing fixture outlet box. Secure with wire nut.
• BLACK wire from fan to YELLOW wire in ceiling fix-
ture outlet box. Secure with wire nut.
• BLUE (D-1 Option) wire from fan to RED wire in ceil-
ing fixture outlet box. Secure with wire nut.
Inspect each wire nut and ensure that no bare wire is visible;
pull on each wire to test the connection is mechanically sound.
SLOT
WHITE
GREEN
WIRE NUT
CANOPY
PIN
120V AC
GROUND