Setting The Data Interfaces - HEIDENHAIN TNC 426 B User Manual

12.4 Setting the Data Interfaces

To setup the data interfaces, press the RS 232- / RS 422 - SETUP
soft key. to call a menu for setting the data interfaces:
Setting the RS-232 interface
The mode of operation and baud rates for the RS-232 interface are
entered in the upper left of the screen.
Setting the RS-422 interface
The mode of operation and baud rates for the RS-422 interface are
entered in the upper right of the screen.
Setting the OPERATING MODE of the external
device
The functions "Transfer all files, " "Transfer selected file, "
and "Transfer directory" are not available in the
operating modes FE2 and EXT.
Setting the BAUD RATE
You can set the BAUD-RATE (data transfer speed) from 110 to
115,200 baud.
External device
HEIDENHAIN floppy disk units
FE 401 B
FE 401 from prog. no. 230 626 03
HEIDENHAIN floppy disk unit
FE 401 up to prog. no. 230 626 02
PC with HEIDENHAIN data transfer
Software TNCremo
Non-HEIDENHAIN devices such as
Punchers, PC without TNCremo
PC with HEIDENHAIN software
TNCremo for remote operation of the TNC
300
www.EngineeringBooksPdf.com
Operating mode Symbol
FE1
FE1
FE2
FE1
EXT1, EXT2
LSV2
12 MOD Functions