HEIDENHAIN TNC 426 B User Manual page 335

3-D touch probes and digitizing
Select touch probe
(only with option for digitizing with measuring touch probe)
Select signal transmission
Probing feed rate for triggering touch probes
Maximum traverse to first probe point
Safety clearance to probing point during automatic measurement
Rapid traverse for triggering touch probes
Measure center misalignment of the stylus when calibrating a triggering touch probe
Multiple measurement for programmable probe function
Confidence range for multiple measurement
Infeed of the stylus when digitizing with the measuring touch probe
Measure center misalignment of the stylus when calibrating a measuring touch probe
320
www.EngineeringBooksPdf.com
MP6200
Triggering touch probe: 0
Measuring touch probe: 1
MP6010
Touch probe with cable transmission: 0
Touch probe with infrared transmission: 1
MP6120
1 to 3000 [mm/min]
MP6130
0.001 to 99 999.9999 [mm]
MP6140
0.001 to 99 999.9999 [mm]
MP6150
1 to 300 000 [mm/min]
MP6160
No 180° rotation of the 3-D touch probe during calibration: 0
M function for 180° rotation of the 3-D touch probe during calibration:
1 to 88
MP6170
1 to 3
MP6171
0.001 to 0.999 [mm]
MP6310
0.1 to 2.0000 [mm] (recommended input value: 1 mm)
MP6321
Measure center misalignment: 0
Do not measure center misalignment: 1
13 Tables and Overviews