Table of Contents
Advertisement
Data transfer between the TNC and TNCremo
Ensure that:
The TNC is connected to the correct serial port on your PC
The data transfer speed set on the TNC for LSV2 operation is the
same as that set on TNCremo.
The TNC is connected to the correct serial port on your PC
Once you have started TNCremo, you will see a list of all of the files
that are stored in the active directory on the left of main window
Using the menu items <Directory>, <Change>, you can change the
active directory or select another directory on your PC.
To establish the connection with your TNC, select the items
<Connect>, <Link (LSV-2)>. The TNCremo now receives the file and
directory structure from the TNC and displays this at the bottom left
of the main window ( ). To transfer a file from the TNC to the PC,
select the file in the TNC window (highlighted with a mouse click)
and activate the functions <File> <Transfer>.
To transfer a file from the PC to the TNC, select the file in the PC
window and activate the functions <File> <Transfer>.
End TNCremo
Select the menu items <File>, <Exit>, or press the key
combination ALT+X
Refer also to the TNCremo help texts where all of the
functions are explained in more detail.
HEIDENHAIN TNC 426 B, TNC 430
www.EngineeringBooksPdf.com
.
303
Advertisement
Table of Contents
