HEIDENHAIN TNC 426 B User Manual page 338

Measuring rotating tools: Permissible rotational speed at the circumference of the milling tool
Required for calculating rpm and probe feed rate
Coordinates of the TT 120 stylus center relative to the machine datum
TNC displays, TNC editor
Programming station
Acknowledgment of POWER INTERRUPTED after switch-on
ISO programming: Block number increment
HEIDENHAIN TNC 426 B, TNC 430
www.EngineeringBooksPdf.com
MP6570
1.000 to 120.000 [m/min]
MP6580.0 (traverse range 1)
X axis
MP6580.1 (traverse range 1)
Y axis
MP6580.2 (traverse range 1)
Z-axis
MP6581.0 (traverse range 2)
X-axis
MP6581.1 (traverse range 2)
Y-axis
MP6581.2 (traverse range 2)
Z-axis
MP6582.0 (traverse range 3)
X-axis
MP6582.1 (traverse range 3)
Y-axis
MP6582.2 (traverse range 3)
Z-axis
MP7210
TNC with machine: 0
TNC as programming station with active PLC: 1
TNC as programming station with inactive PLC: 2
MP7212
Acknowledge with key: 0
Acknowledge automatically: 1
MP7220
0 to 150
323