HEIDENHAIN TNC 426 B User Manual page 65

Data transfer to or from an external data medium
Before you can transfer data to an external data medium,
you must set the interface (see „Section 12.4 Setting the
Data Interfaces").
Calling the file manager
<
Select the screen layout for data transfer: press
the WINDOW soft key. In the left half of the
screen, the TNC shows all of the
stored on the TNC, and in the right half of the
screen,
external data medium.
<
Use the arrow keys to highlight the file(s) that you want to
transfer:
Move the highlight up and down within a
window
Move the highlight from the left to the right
window, and vice versa.
If you are transferring from the TNC to the external medium,
move the highlight in the left window onto the file that is to be
transferred.
If you are transferring from the external medium to the TNC,
move the highlight in the right window onto the file that is to be
transferred.
<
Transfer a single file: Press the COPY soft key, or
To transfer several files, use the
TAG soft key (in the second soft-key row, see
also Tagging functions earlier on in this chapter),
or
transfer all files by pressing the TNC EXT soft
key
<
HEIDENHAIN TNC 426 B, TNC 430
www.EngineeringBooksPdf.com
files that are
all of the files that are stored on the
49