Table of Contents
Advertisement
To leave the pallet file:
To select the file manager, press the Taste PGM MGT key.
To select a different type of file, press the SELECT TYPE soft key
and the soft key for the desired file type, for example SHOW.H.
Select the desired file.
To execute the pallet file
In machine parameter 7683, set whether the pallet table
is to be executed blockwise or continuously (see „13.1
General User Parameters").
Select the file manager in the operating mode Program Run, Full
Sequence or Program Run, Single Block: Press the PGM MGT key.
Display all .P files: Press the soft keys SELECT TYPE and
SHOW .P .
Select pallet table with the arrow keys and confirm with ENT.
To execute pallet table: Press the NC Start button. The TNC
executes the pallets as set in Machine Parameter 7683.
66
www.EngineeringBooksPdf.com
4 Programming: Fundamentals of NC, File Management,
Programming Aids, Pallet Management
Advertisement
Table of Contents
