HEIDENHAIN TNC 426 B User Manual page 325

Error message
NFS2: <Device name> (W) WRITESIZE SMALLER THEN x SET TO x
NFS2: <Device name> (W) WRITESIZE LARGER THEN x SET TO x
NFS2: <Device name> (E) MOUNTPATH TOO LONG
NFS2: <Device name> (E) NOT ENOUGH MEMORY
NFS2: <Device name> (E) HOSTNAME TOO LONG
NFS2: <Device name> (E) CAN NOT OPEN PORT
NFS2: <Device name> (E) ERROR FROM PORTMAPPER
NFS2: <Device name> (E) ERROR FROM MOUNTSERVER
NFS2: <Device name> (E) CANT GET ROOTDIRECTORY
NFS2: <Device name> (E) UID OR GID 0 NOT ALLOWED
310
www.EngineeringBooksPdf.com
Cause
The value that you entered for DEFINE
MOUNT, WS is too small. The TNC sets WS to
512 bytes.
The value that you entered for DEFINE
MOUNT, WS is too large. The TNC sets WS to
4096 bytes.
The value that you entered for DEFINE
MOUNT, PATH is too long.
At the moment there is too little main memory
available to establish a network connection.
The name you entered in DEFINE NET, HOST
is too long.
The TNC cannot open the port required to
establish the network connection.
The TNC has received implausible data from
the portmapper.
The TNC has received implausible data from
the mountserver.
The mount server does not permit a
connection with the directory defined in
DEFINE MOUNT, PATH.
You entered 0 for DEFINE MOUNT, UID or GID
0. The input value 0 is reserved for the system
administrator.
12 MOD Functions