HEIDENHAIN TNC 426 B User Manual page 323

Table of Contents

Advertisement

Setting
Meaning
DCM
Here you enter the rights of access to files on
the NFS server (see figure at upper right).
Enter a binary coded value.
Example: 111101000
0: Access not permitted
1: Access permitted
DCM
Here you enter the rights of access to files on
the NFS server (see figure at upper right).
Enter the value in binary coded form.
Example: 111101000
0: Access not permitted
1: Access permitted
AM
Definition of whether the TNC upon switch-on
should automatically connect with the
network.
0: Do not connect automatically
1: Connect automatically
Defining the network printer
Press the DEFINE PRINT soft key if you wish to print the files on
the network printer directly from the TNC.
Setting
Meaning
ADDRESS
Address of your server. Input: four decimal
numbers separated by points. Ask your
network manager for the number of your
address. e.g. 160.1.13.4.
DEVICE NAME
Name of the printer that the TNC shows when
the PRINT soft key is pressed (see also „4.4
File Management with Additional Functions")
PRINTER NAME
Name of the printer in your network. Ask your
network manager.
Checking the network connection
Press the PING soft key.
Enter the Internet address of the device with which you wish to
check the connection, and confirm your entry with ENT. The TNC
transmits data packets until you exit the test monitor by pressing
the END key.
In the TRY line the TNC shows the number of data packets that
were transmitted to the previously defined addressee. Behind the
number of transmitted data packets the TNC shows the status:
Status display
Meaning
HOST RESPOND
Data packet was received again, connection is
OK.
TIMEOUT
Data packet was not received, check the
connection.
CAN NOT ROUTE
Data packet could not be transmitted. Check
the Internet address of the server and of the
router to the TNC.
308
www.EngineeringBooksPdf.com
111101000
All other users:
All other users:
All other users:
Work group
Work group:
Work group:
User: Search
User: Write
User: Read
Search
Write
Read
Search
Write
Read
12 MOD Functions

Advertisement

Table of Contents
loading

Table of Contents