Table of Contents
Advertisement
Editing functions for tool tables
Select beginning of table
Select end of table
Select previous page in table
Select next page in table
Look for the tool name in the table
Show tool information in columns or
show the information on one tool on one screen page
Move to beginning of line
Move to end of line
Copy the highlighted field
Insert the copied field
Add the entered number of lines (tools)
to the end of the table
Display / Do not display pocket numbers
Display all tools / only those tools that are
stored in the pocket table
74
www.EngineeringBooksPdf.com
Additional notes on tool tables
Soft key
Machine parameter 7266.x defines which data can
be entered in the tool table and in what sequence
the data is displayed. Note when configuring the
tool table that the total width cannot be more than
250 characters. Wider tables cannot be transferred
over the interface. The width of the individual
columns is given in the description of MP7266.x.
You can overwrite individual columns or
lines of a tool table with the contents of
another file. Prerequisites:
The target file must exist.
The file to be copied must contain only
the columns (or lines) you want to
replace.
To copy individual columns or lines,
press the REPLACE FIELDS soft key (see
section 4.4 "Enhanced File Manage-
ment").
5 Programming: Tools
Advertisement
Table of Contents
