Table of Contents
Advertisement
Erasing and inserting characters, words and lines
With the text editor, you can erase words and even lines, and insert
them at any desired location in the text. See the table at right.
To move a word or line to a different location:
Move the cursor to the word or line you wish to erase and insert
at a different place in the text.
Press the DELETE WORD or DELETE LINE soft key: The text is
deleted and stored temporarily.
Move the cursor to the location where you wish insert the text,
and press the RESTORE LINE/WORD soft key.
Editing text blocks
You can copy and erase text blocks of any size, and insert them at
other locations. Before carrying out any of these editing functions,
you must first select the desired text block:
To select a text block, move the cursor to the first character of the
text you wish to select.
Press the SELECT BLOCK soft key.
Move the cursor to the last character of the text you
wish to select. You can select whole lines by moving
the cursor up or down directly with the arrow keys —
the selected text is shown in a different color.
After selecting the desired text block, you can edit the text with the
following soft keys:
Function
Delete the selected text and
store temporarily
Store marked block temporarily
without erasing (copy )
If necessary, you can now insert the temporarily stored block at a
different location
Move the cursor to the location where you want to insert the
temporarily stored text block.
Press the INSERT BLOCK soft key _ the text block in
inserted.
You can insert the temporarily stored text block as often as desired.
HEIDENHAIN TNC 426 B, TNC 430
www.EngineeringBooksPdf.com
Delete functions
Delete and temporarily store a line
Delete and temporarily store a word
Delete and temporarily store a character
Insert a line or word from temporary
storage
Soft key
Soft key
61
Advertisement
Table of Contents
