MIXVIBES CROSS DJ User Manual page 38

available presets to define how croSS DJ shall react when this mIDI event
is received. If you choose Toggler Button then this event toggles the state
of the mapped control: if the current status is off the status will be set to
on; if the current status is on then pressing the mapped button will set the
state to off.
If you choose Holder Button, then the status of the control will change as
long as the mapped button is held.
additionally you can activate the Invert check box in section Preset Op-
tions. If you have mapped a control as a Holder Button, the mapped feature
is on while the mapped button is held. However, if Invert is activated, the
mapped feature is off, while the mapped button is held.
4 click OK to add the mapping to the mIDI preset.
5 click the Add mapping button next to Amount. the mIDI control mapping
windows is opened.
6 move a fader or a knob on your controller and have a look at the available
options.
for controls that are used to set a croSS DJ control to a particular value
and where a fader or a knob is moved, the mIDI control mapping windows
offers the presets Direct Fader/Knob and Inc.-Dec Normal Fader/Knob.
In general you should use Direct Fader/Knob for faders and knobs with
a defined start and end point and you should use Inc.-Dec Normal Fader/
Knob for endless encoders.
In section Preset Options you see the Invert option that you know already
from the first example. Use Invert for faders and knobs if you wish to invert
the meaning of the left/right or up/down movement or position of the mIDI
control.
Connect and Configure your Hardware
38