Customising The Players /77 - MIXVIBES CROSS DJ User Manual

With the introduction of the beatgrid it is now possible to select between three dif-
ferent synchronisations. The selected sync mode defines what will happen when
you press/click the Sync button. In order for this to work the tracks in both players
do need a beatgrid.
You can configure the sync mode of CROSS by opening the Preferences/General
tab and select the desired mode in list Sync Mode:
•
Beat If you select Beat mode, then pressing Sync only syncs to the other play-
er's beat. Both tracks are then running beat or phase synchronous.
•
Bar If you select Bar mode, then pressing Sync synchronizes the track in the
player to the same beat number in a bar that is playing in the other player. Both
tracks are running bar synchronous.
•
Cycle If you select Cycle mode, then pressing Sync synchronizes the track in
the current player to the same bar and the same beat number in a cycle that is
playing in the other player. Both tracks are running cycle synchronous.
7.9 Customising the Players
You can customise the players to make them better fit to your needs. Some of the
options are available in the user interface.
Vinyl Mode/CD Mode
Waveform
Zoom
Scroll Mode
Waveform Zoom use the three buttons at the outer side of the waveform to zoom
in, to zoom out and to reset the zoom to the default value.
Waveform Scroll Mode In the default setting the playback maker on the wave-
form is at a fixed position and the waveform moves underneath it during playback.
click the Waveform Scroll Mode button, if you want the playback marker to move
and the waveform to be fixed.
Vinyl Mode/CD Mode use this button to activate Vinyl mode. In Vinyl mode you
can use the jogwheel of u-mIX control pro/u-mIX control 2 to scratch your
Lead In
Importing and Mixing your Music
77