MIXVIBES CROSS DJ User Manual page 103

2 perform one of the following steps. please note that you can set a locator
only if the locator button is not yet used:
•
click Loc 1 to set locator 1, Loc 2 to set locator 2 etc.
•
use the (ÿ) key to set the focus to the player where the you wish to
delete a locator. press (1) to set locator 1, (2) to set locator 2 etc.
•
press one of the locator buttons 1, 2, 3 on your u-mIX control to set
locator 1, 2, or 3. press the SELECT button, and then press one of the
locator buttons 1, 2, 3 to set locator 4, 5, or 6.
the position of the locator (time) is shown on the locator button in the play-
er.
the same keys/buttons can be used to jump to a locator, once it is set.
Toggle between Locators 1-3 and Locators 4-6
BUTTON ONLY: Set/Select Locator
SHIFT+BUTTON: Delete Locator
Deleting Locators
perform one of the following actions to delete a locator:
•
click the Delete button (with the X) next to the locator that you wish to delete.
•
use the (ÿ) key to set the focus to the player where you wish to delete a loca-
tor. press (ª)+(1) to delete locator 1, (ª)+(1) to delete locator 2 etc.
•
Hold the SHIFT button and press one of the locator buttons 1, 2, 3 on your
u-mIX control to delete locator 1, 2, or 3. press the Select button, hold the
SHIFT button and then press one of the locator buttons 1, 2, 3 to delete locator
4, 5, or 6.
9.5 Effects
each of the croSS DJ players has its own dedicated fX section, where you can
select the effect, switch it on and set all effect parameters with one knob. also
the u-mIX control pro/u-mIX control have two fX sections with one push
encoder and one knob each. this makes using the effects very easy.
Advanced Features
103